Power Ultralinear 38 Watts per channel Power Triode 21 Watts per channel Frequency Response 10Hz - 30 kHz +/- 1 dB THD with AABB < 0,22% @ 1W; less than 1,2% at rated power S/N Ratio 89 dB Input Impedance 100 kOhm Input Sensitivity 270 mV (for rated power at max. volume setting) Maximum Gain 36,5 dB Power Consumption 250 Watts Net Weight 63.8 lbs / 29 kg Shipping Weight 70.5 lbs / 32 kg Dimensions 15.9" x 15.2" x 8.3" / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions 22.7" x 18.4" x 12" / 577 mm x 468 mm x 305 mm (L x W x H) Inputs 5 pairs Stereo RCA, 1 pair Home Theater Input Outputs 1 pair Stereo RCA Tape, 4 & 8 Ohm Speaker Taps Tube Complement 4 x KT-88, 2 x 12AX7, 2 x 12AU7
Integrated valve amplifier 38 Watts stereo, with KT88 valves, auto bias circuit. The DiaLogue Two is a KT-88 based vacuum-tube integrated amplifier, hand-made with the finest point to point wiring, using workmanship that is equal to or better than any product you can buy at any price. The amplifier is built using finest premium parts. A toroidal transformer for the powersupply. Custom designed -in conjunction with one of the most prestigious transformer-designers in the USA- encapsulated output transformers for lowest hum, wide bandwidth for great bass and extended highs. Ceramic tube sockets. ALPS volume control. Nichicon and Solen capacitors. Gold plated heavy duty speaker terminals and gold plated input jacks. Remote control for source selection, volume and choice of Ultralinear or Triode amplification. Five line level inputs, one HT Pass Thru and one tape out. It is enclosed inside a heavy gauge steel, fully vented chassis with five coats of finish. Each coat hand rubbed and polished. The Adaptive AutoBias circuit, an exclusive to PrimaLuna, monitors and smoothfully adjusts bias constantly and instantly, reducing maintenance and increasing performance because of a dramatic reduction in distortion. For extended life of tubes and switches plus a reduced chance of tube failure/shorts, the amplifier uses a soft-start circuit. Tube plate fusing is used to protect the output stage. Other amps might need a trip to the shop if a tube fails. Not this one. Just plug in a new tube and fuse, and go.
Integrated valve amplifier 38 Watts stereo, with KT88 valves, auto bias circuit. The DiaLogue Two is a KT-88 based vacuum-tube integrated amplifier, hand-made with the finest point to point wiring, using workmanship that is equal to or better than any product you can buy at any price. The amplifier is built using finest premium parts. A toroidal transformer for the powersupply. Custom designed -in conjunction with one of the most prestigious transformer-designers in the USA- encapsulated output transformers for lowest hum, wide bandwidth for great bass and extended highs. Ceramic tube sockets. ALPS volume control. Nichicon and Solen capacitors. Gold plated heavy duty speaker terminals and gold plated input jacks. Remote control for source selection, volume and choice of Ultralinear or Triode amplification. Five line level inputs, one HT Pass Thru and one tape out. It is enclosed inside a heavy gauge steel, fully vented chassis with five coats of finish. Each coat hand rubbed and polished. The Adaptive AutoBias circuit, an exclusive to PrimaLuna, monitors and smoothfully adjusts bias constantly and instantly, reducing maintenance and increasing performance because of a dramatic reduction in distortion. For extended life of tubes and switches plus a reduced chance of tube failure/shorts, the amplifier uses a soft-start circuit. Tube plate fusing is used to protect the output stage. Other amps might need a trip to the shop if a tube fails. Not this one. Just plug in a new tube and fuse, and go.
