Video Products

This integrated preamplifier produces a visual effect of abundance through its colours, forms and the optimal use of space. ...[more]

To ensure the utmost flexibility, to ensure perfect matching to a wide range of cartridges, the E-Glo provides capacitance loading for moving-magnet types in six user-switchable steps from 47pf to 900pF. ‘The loading resistance for moving-coil cartridges is continuously adjustable,’ says Lichtenegger, ‘as we already have on our Phono Box RS.’ Ensuring quiet operation is ...[more]

Elegant high-end tube phono pre-amplifier with ultra slim design! E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors. RIAA curve is equalised fully passive ...[more]

·Premium parts like used in all our other models; wide bandwidth for great bass and extended highs; ceramictube sockets; Nichicon and DuRoch capacitors; 5AR4 tube-rectifier-circuitry; gold-plated panel mounted RCA input and output jacks. A 100% shielding Phono chassis where needed. SoftStart™ circuit for extended life of sensitive components, plus a reduced chance of tube f...[more]

REFERENCE PHONO 10 PHONO PREAMPLIFIER Vinyl record playback has been an integral part of Audio Research since our founding in 1970. Think back to the great phono stages built into the defining preamplifiers of their day, among them the SP3, SP6, SP8, SP10, and SP11. Even after the introduction of the compact disc in 1982, phono sections remained a revered part of our preamplifiers. The firs...[more]

...[more]

...[more]

...[more]

The LP1 has 47dB of gain, perfect for higher output (>1.0mV) phono cartridges. It is a hybrid design utilizing one 6H30 tube, special low noise JFETs, custom Audio Research designed power transformer (made in the U.S.), and multiple stages of regulation. There is no overall feedback, and it is non-inverting.  Inputs and outputs are single-ended. Controls are as simple with switches for Pow...[more]

The choices of the load are 47K, 1000, 500, 200 or 100 ohms. All functions are duplicated on the remote control. The rear panel includes a pair of single-ended inputs, a ground, and a 15A IEC connector. The PH6 is a hybrid (like PH5), with high-gain JFET input constant current and stadiuo stabilization without any counter-reaction. The PH6 uses four 6H30 twin triodes. Instead of replacin...[more]